Dust-free Prepreg Automatic Cutting Machine
Dust-free Prepreg Automatic Cutting Machine is used to cut rolled prepreg to sheet, to solve the problem of prepreg spreading and large dust in cutting and after cutting.
Product Description
Usage
The Dust-free Prepreg Automatic Cutting Machine is used for cutting rolled prepreg ,to solve the problems of prepreg spreading and too much dust in cutting and after cutting so as improve the cutting accuracy ,quality and efficiecny.
Dust-free Prepreg Automatic Cutting Machine Characteristics
1. The first company to adapt infrared preheating technology in prepreg cutting
2. Low dust,environmental protection, Preheating then cuting, automatic sealing side, without drawing;lncrease the dust collection device,through the detailed calculation and analysis of fluid, reduce dust, environmental health.
3. Precision: using high precision actuator and synchronous servo control system, high cutting precision
4. High quality: cut the Pre-preg neatly, automatic edge banding, no drawing.
5. High efficiency:
dynamic heating transverse, longitudinal cutting, cutting efficiency;
After cutting the PP sheet can be used directly,without subsequent sealing side, vacuuming, etc;
The precision of the cutting, further improve the cutting efficiency is further improved;
PP sheet can be automatically stacked;
Parameters can be packed up and brought up direcly.
Dust-free Prepreg Automatic Cutting Machine TECHNICAL PARAMETER
|
Model |
Cutting Accuracy |
Cutting Length |
Cutting Width |
Cutting thickness |
Size |
Weight |
efficiency |
|
CQ3000A |
±1mm |
280mm-750mm |
300mm-1260mm |
0.04-0.3mm |
2800*2200*1900mm |
1850kg |
≤25 times /64 seconds |
|
±1mm |
250mm~750mm |
200mm~1270mm |
0.02mm~0.3mm |
2500*2200*1658mm |
1800kg |
≤21 times /64 seconds |
|
|
CQ1000 |
±1mm |
50mm-750mm |
200mm-1270mm |
0.02mm-0.3mm |
2600*2300*1700mm |
1500kg |
≤17 times /64 seconds |
Dust-free Prepreg Automatic Cutting Machine AFTER-SALES SERVICE
•Zhengye Technology instrument warranty period of 12 months, during the warranty period for non-user responsibility for damage or failure caused by the use of the company free of charge to repair or replace.
•Zhengye Technology will respond to technical questions from users within one hour; if the instrument and equipment failure occurs, the company guarantees to send professional maintenance personnel to the scene within 48 hours (special remote areas and users are negotiated separately).
•Zhengye Technology has set up a nationwide maintenance service network, and implements whole-life tracking service for sold instruments and equipment, and sends personnel to visit users regularly (quarterly phone calls) to discover potential failures in advance and eliminate them in time, so that the instruments and equipment are in good working condition.
